|
|
NEW PRODUCT OFFERING!
AXLE HOUSING NARROWING, INSPECTION, and STRAIGHTENING TOOLS
Now your shop can check, straighten, and narrow axle housings using time tested, professional quality tooling designed, built, and used by the Dutchman.
Technical information and features:
The bushings and housing end fixture are machined from the billet of steel, heat treated and case hardened, then finished by precision honing the bores and finish grinding the o.d.'s. The case hardening makes them resistant to nicks and wear.
The alignment bar is industrial hard chromed to resist wear, tear, and weld spatters.
|
|
Applications, sizes, and pricing:
|
| Alignment bar: 1 ½" diameter 50" long, hard chromed. |
$100
|
| Alignment bar: 1 ½" diameter 60" extra long, hard chromed. |
$125
|
| 2.891" carrier bore bushings service Ford 8" & 9", 9 bolt "Austrailians", 10 bolt GM, and Dana 30 housings. |
$165pr
|
| 3.062" carrier bore bushings service Ford 9", 12 bolt GM, and 8.8 Ford housings. |
$170pr
|
| 3.150" carrier bore bushings service 55-64 Chevy housings. |
$175pr
|
| 3.268" carrier bore bushings service Dana 44, Mopar 8 ¾" & 57-64 Olds-Pont. |
$180pr
|
| 3.543" carrier bore bushings service 9 1/4 "Metric" 14 Bolt |
$185pr
|
| 3.812" carrier bore bushings service Dana 60 and 14 bolt housings. |
$190pr
|
| 4.125" carrier bore bushings service Dana 70 & 80 |
$200pr
|
Housing end fixture only
The housing end fixture is double ended and pre drilled for 6 different press on bearing type housing ends including Ford, Mopar, Olds-Pontiac, and our new billet ends which convert various c-clip, BOP, and Dana/Spicer rear ends to press on bearing axles without the use of expensive c-clip eliminator kits. |
$295
|
|
Special package deal
Individual components are available separately, but take advantage of our package pricing--the bar, housing end fixture, and any 2 sets of bushings with instructions and helpful tips at our limited time offering of $595--a savings of $120 to $150!
|
$595
|
